Cecomp Electronics, CTP1B15PSIA-NC, CTP1B Battery Powered Digital Pressure Gauge with 1 Button Operation and NIST Traceability Documentation, 15-0 PSI Abs, 15.0 PSI
Power-Up
Press and hold the front button for approximately 1 second. The display is tested, the default full-scale range is indicated, the full-scale range in the selected units are indicated, the display is tested again, then the actual pressure and units are displayed. The back lighting will turn on for 1 minute and then automatically shut off. Display back lighting can be turned on by momentarily pressing the power button whenever the gauge is on. This also restarts the auto shutoff timer. The display back lighting will not be apparent under bright lighting conditions.
Shut-Down
To shut off the gauge manually at any time, press and hold the button until the display indicates OFF (about 5 seconds) and then release. When an auto shutoff timer is used, the display indicates OFF five seconds prior to auto shutoff. The button can be pressed to keep the gauge on. The auto shutoff and backlight (if equipped) timers are reset whenever the button is pressed and released. If the gauge is set up without auto shutoff (on/off operation) it will stay on until manually shut off or until the batteries are depleted. Turn gauge off when not in use to conserve battery life.
Options
- NC - NIST traceability documentation, 5 points and date
Red rubber boot White LED backlight All metal case Port reinforcement Coated circuit boards
Features:
- ±0.1% Test Gauge Accuracy in Most Ranges
- Ultra-Ruggedized Design
- 316L Stainless Steel Wetted Parts
- Selectable Units and Auto Shutoff Times
- White LED Display Backlight
- Min/Max Memory